Print PDF
Favorite
Email
Step 5Camera installation
Now you're ready to install this on your camera. Simply screw in the hook into the tripod mount at the bottom of your camera. When the hook becomes snug, tighten down the nut to meet with the camera body. You do not need to screw this down with much torque, it is only there to keep the hook from backing out. You can cut the hook to exact length if you want.
NOTE: If your camera has plastic threads, be careful not to cross thread the hook. You should never have to force it in.
NOTE: If your camera has plastic threads, be careful not to cross thread the hook. You should never have to force it in.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
