Picture of Strip and Tin Wires Like a Pro
Ever need to strip a wire but don't have any wire strippers handy? This instructable shows you how to strip the insulation off wires perfectly every time so that you'll never have to swap between your side cutters and wire strippers ever again.

Once stripped using this method it also lets you twizzle the wires perfectly before soldering them, leaving you with a very neat tinned wire.

These tricks were some of the first things that Steveastrouk taught me when I started working for him after we met on Instructables. I use the wire stripping trick almost every day and has saved me hours.

Read on to find out how!

Step 1: Tools & Materials

Picture of Tools & Materials

- side cutters
- soldering iron
- wet sponge or soldering iron cleaning gumpf of choice

- wire (duh!), single or multi core.
- solder

1-40 of 52Next »
larry.rivard7 months ago
Great tips. I have already used them a few times.
tobywinks7 months ago
Pretty neat! Check out my diy for a wiring time saver. I bet it would help you, and feel free to vote?
masha Allah a simple and good technique. I have twisted wire like that before but never thought of tinning it before pulling it off......how about another one for joining two or more wires together and also for splicing wires...thanks bro
Very simple idea that works brilliantly. Thank you for this instructable.
ynze2 years ago
Wow, did you hire a professional photographer to get the pictures? It's a great I'ble, but I'm really IMPRESSED by the quality of the pics. Can you tell something on how you made them (or make an I'ble about it ;-))?

Jayefuu (author)  ynze2 years ago
Amazing what good lighting and background does eh?! To get these, I think I used a Canon D50 at Instructables HQ. The background is a massive roll of photography paper hanging above a table, there were two large 500W lamps with diffusers around the table. I fiddled with some camera settings as Noah or Randy told me to but I don't remember which now. I think Randofo has a guide on it somewhere, I'll try dig it out, but bascially.... nice clean white background and LOTS of light. I also did some post processing on the images to whiten the background, just adjustments in Picassa I think.
Jayefuu (author)  Jayefuu2 years ago
It was similar to this:
ynze Jayefuu2 years ago
Did you take the pictures with a remote control (no, because I can see both of your hands in the pics)? Voicecontrol? Smellsoldercontrol? The camera's timerfunction?
Jayefuu (author)  ynze2 years ago
Voice control. I think Mikeasaurus was leaning over my shoulder. :D
Jayefuu (author)  Jayefuu2 years ago
Oh and another popular trick if you're rubbish at photography like me, take 100 photos and use only 5 of them.
ynze Jayefuu2 years ago
That's no trick for rubbish photographers, that's a pro trick! (and not so much a trick, it's just that getting the right picture is so darn difficult, even for a pro...)
I have been soldering for over forty years, and I can tell you that this is extremely poor instruction. If anything works after using these techniques, I would be very surprised!!!!

These are very basic instructions, and should be followed with some technique. Also basic solder techniques dictate that you only heat solder once!!!!
Jayefuu (author)  stevenbrenner2 years ago
Some comments...

"soldering for over forty years"
I was taught this by an equally experienced engineer as you. Stripping wires is something everyone reaches for a pair of wire strippers for when it's unnecessary, especially since most people do more damage to the wire using an incorrectly set stripper than someone taught this would. Re the tinning, I've watched people struggle to tin wires with a helping hand and still get a worse result than this. This method teaches you how to hold them so you a) won't burn yourself b) don't overheat the insulation c) only need two hands.

"extremely poor instruction"
Or perhaps you've just misunderstood? It's an excellent method, it was an eye opener when I was taught it and the people I've shown since have also been impressed with how easy and useful it is.

"Also basic solder techniques dictate that you only heat solder once!!!!"

I've never heard this "basic" technique. Care to explain why? I can only think that you're confusing it with reheating old solder. Perhaps? Since many things require tinning and then soldering to something.

I was trained to work to "MIL STANDARD 2000" which among other things States that one touch soldering is the only acceptable practice.

As far as stripping wires, no nicks of any conductor is acceptable. \

And as far as "Only Heat Once", this is because a second heating of the solder introduces oxygen into the solder along with other contaminents that increase resistance, and needlessly reheats components.

Tinnig is nessesary, but then you insert the wire in whatever you are attaching it to, and use fresh solder to complete the joint.

If you will note, I stated that this instruction should be followed with some technique.

As far as my training goes, I was certified as an instructor for various soldering operations, both military and commercial.

Jayefuu (author)  stevenbrenner2 years ago
Thanks, that's interesting. Perhaps I should add a disclaimer at the end... "If you're working to mil standard 2000, ignore this tutorial you found on the internet and follow your training".
I did not intend to negate your excellent instructable, but to add that to do a good job you should develop "proper technique" in order to minimize possible damage to the parts and assemblies that you are constructing and or repairing!

Thank Yuo for your response. Steven E Brenner
lbrewer423 years ago
Genius! Another one of those "I should have thought of that" moments has struck :)
bman20113 years ago
Impressive........... Most Impressive!!!!!

Always had trouble soldering my wires, due to the dumb fact I did not TIN the wires! Thanks of the education,dude!
Krayzi993 years ago
Wow. Goodbye, millions of extra hours soldering and tinning wires!
MrMike3 years ago
I didn't know "twizzle" is the technical term for tightening the manufactured, supplied multi-strand wire before crimping or soldering....

Just do it in the same direction that the base wire was formed with...

Takes quite a bit of practice to develop the muscle memory in applying 'just enough' pressure to cut insulation and not nick wires....


Twizzle: verb
spin or cause to spin around.

I don't know as far as twizzle being the technical term but it's a fun word to say and now I have a reason to say it. :)
iceng3 years ago
Yes, its good to be able to work with a pair of "dykes" side cutters,
I keep the tip edges nice and sharp and only cut wire on the deep inside edge.

But at the cost of stripper, I keep ten on hand, spread about my shop at
various places and on or two anchor tied in place by the wire racks.

May be I will do an ible on the skill of stripping narrow gauge insulated wire
with the most convenient tool in my shop My Teeth !
Works great every time over 69 years and sizzles when tinning.

BTW nice to see you in SF :-)

tkjtkj iceng3 years ago
thanks for input,really..

i would only mention that those cutter's real
name is: Diagonal Cutters ..

So, i dont really think 'dykes' approaches that spelling and i just never use it .. especially because some women might strongly object ..
"Dikes" seems more fitting, no?
iceng tkjtkj3 years ago
Sure, but I learned the tool slang long before the unfortunate anatomical
reference changed the meaning of the word, in this my third life language.

Sorry, if my poor phonetic spelling offended any one, I tried to stay clear of the
canal wall reference and got into something even less desirable.
tkjtkj iceng3 years ago
im sure nobody here was offended .. certainly not I ..
and tnx for the reply

lperkins tkjtkj3 years ago
From listening carefully to the pronunciation of the slang term by the electronics workers I know who are in their late seventies to early eighties, I would have to postulate that the proper spelling of the slang term is probably, "diags." Which also makes logical and linguistic sense given its derivation from the proper name of the tool. :)
Jayefuu (author)  iceng3 years ago
Thanks :) Let me know in you're in the bay area in the next month or so.
riff raff3 years ago
Good luck using that technique on Teflon wires. :-/
Works perfectly. See my caveat. I've done miles of Teflon wires

Nice Ible !

The only thing Jayefuu's missed about my technique is that he is, and should point out, using Lindstrom cutters. Having VERY sharp cutters that penetrate the insulation is critical to the method, since blunt ones will merely force the insulation all the harder onto the strands, and you are pretty well guaranteed to snap a strand.

Sadly Lindstroms ain't cheap - they'll set you back over 50 bucks a pair or up to 100 for the top range ones. However they'll last a lifetime of copper work. Mine still cut a strand of hair - and they're 30 years old.

MTJimL3 years ago
Practice, practice, practice, on spare wire of different gauges. Until you're completely confident with the cutters, it's a good idea to do a trial strip before trying to get it right on a wire that's already cut to length ... Oops!
cc0war03 years ago
nice work
If you can do this without nicking the wires, then good job.
gezer2u3 years ago
thanks for the tips! I really liked the tip about leaving the insulation on.

I would rate it but couldn't get the stars to come up no matter how many times I refreshed . :(
sconner13 years ago
Here's a cool trick.
Use scrap multistranded wire as de-soldering braid.
Strip a 2-3" length at one end and coat the cores in flux.
I place the fluxed wire against the joint to be de-soldered near the insulation end of the stripped section of wire.
Place the iron tip over it and apply heat on top of the wire.
When the solder flows, drag the wire out from under the iron.
This tins the wire by wicking the solder from the joint.
Clip the tinned wire off, strip and flux farther on and repeat.
Thicker wire soaks more solder, thinner gets into tighter spaces.
Very slick - just like this instructable of Jayefuu. My hat's off to you both. Thanks so much for sharing!
ib423 years ago
You have succeeded in demonstrating that words are not necessary to be effective in life! Thanks!
sabr6863 years ago
Nicely constructed ible. So many folks struggle (must be more than just me!) with soldering and wire stripping. This is good stuff. Thank you!
sitearm3 years ago
@Jayefuu; Now I can stop using my teeth (seriously). Thank you! Site :)
SolidRaven3 years ago
A subject dear to my heart as electronic engineering student.
The fact is that we use just about everything we can find to strip wires. Personally I like using hot air soldering tools to soften up the plastic and then pull at it with flat pliers or my finger nails (only do this if your finger tips don't mind hot plastic). This produces very clean results and doesn't damage the cable.
I know some of my friends use their keys to strip wires. Hold the wire in one of the indents and pull it. If you do it right it'll strip the wire easily.
Others use lighters but this leaves scorch marks on the cable that makes soldering harder. Another common method is to go along the wire with the shaft of a soldering iron. But that generally doesn't smell too well.
My only suggestion is, if you're going to work with cables. Use the proper tools, if you damage one of the conductors you might be in for a surprise.
1-40 of 52Next »