Introduction: Strolling Table

Picture of Strolling Table

While looking for blueprints for a table like this online, I couldn't find a compilation of instructions anywhere. I then set out to make a set of blueprints and material list for people like I who would want to build this table. The next few pages will include the material list along with the blueprints.

Step 1: Materials

Picture of Materials

The material list is :

QTY DESCRIPTION COST/PCS TOTAL COST

1 – 4’ x 8’ x 23/32” B/C PLYWOOD $20.08 $20.08

6 – ½”npt pipe x 30” lg. $6.00 $36.00

12 – ½” npt pipe flanges $6.84 $82.08

8 pkg– 12-3/4 Flat Head Phillips Screws $1.18 $9.44

1 Roll – Ram Board 1/16” x 38” x 50’ $29.95 $29.95

1 pkg – 6- ½ Flat Head Phillips Screws $3.57 $3.57

1 pkg – 6 Stainless Washers $2.98 $2.98

8 – 2” Rubber Caster Wheels $ 3.98 $31.84

4 pkg – 10- ¾ Flat Head Phillips Screws $1.18 $4.72

1 – 4’ x 4’ x ¼”thick Plexiglass $125.00 $125.00

TOTAL $345.66

Step 2: Blueprints

Picture of Blueprints

The PDF with the blueprint is included below

Step 3: Finish

Picture of Finish

You are now finished with your own strolling table!

Comments

zvezdica (author)2017-05-18

Hello. We were trying to read the measures, but the letters are so small you can not read it at all. Can you send us exact measures. Thank you from Slovenia.

PaulCoccaro (author)zvezdica2017-08-23

Hi Slovenia

I typically don't monitor the site to often, sorry.

After you download can you print a copy on 11-1/2" x 17" paper or larger?

How can we communicate? e-mail for me is pdfcman@comcast.net

mchau2 (author)2016-03-17

haha, so fun to see a person standing inside! careful not to spill your drinks though!

DIY Hacks and How Tos (author)2016-02-28

Fun table design.

About This Instructable

4,666views

32favorites

License:

More by PaulCoccaro:Strolling Table
Add instructable to: