Print PDF
Favorite
Email
Step 3Attach short boards to legs
The entire platform bed will have a 1/2" gap from the top, nothing will obstruct that 1/2" inch gap all around the platform bed. This is done in advance to secure support beams/boards (plywood or wood strips) at the end of the project.
For your short (head/foot) side boards you want the edge of the legs and board to even out, as shown in picture above. Remember to maintain a 1/2" inch gap. See previous picture #2.
For your short (head/foot) side boards you want the edge of the legs and board to even out, as shown in picture above. Remember to maintain a 1/2" inch gap. See previous picture #2.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
