This instructable shows the structured wiring system that I designed for my home.

This wiring system provides a centralized location for the following services for all of my rooms (master, 3 bdrm, kitchen, living, garage, office).

1) Local area network (LAN),
2) File server and backup,
3) Telephone,
4) Cable HDTV,
5) Power surge,
6) Power conditioning,
7) Signal Amplification,
8) Internet,
9) Battery backup.

I don't have actual construction photos since I didn't take any but i'll show and describe the final solution that I came up with.
Remove these adsRemove these ads by Signing Up

Step 1: Schematic and Materials List

Picture of Schematic and Materials List
The schematic for the whole house structured wiring system is shown in this image. I have also attached PDF file which may be a bit clearer.

Parts Listing:
1) Cat-5e (internet, lan)
2) COAX RG-59 or RG-6 (cable tv, antenna)
3) Phone cable (telephone, cable telephone)
4) Romex Electrical wire (electricity)
5) 4-port Wired/Wireless-N Router
6) 16-port Switch
7) Electrical outlets
8) 8-way video splitters
9) 2-way video splitter
10) Cat5 patch panel
11) telephone patch panel (bus bar)
12) cable modem
13) file server - primary
14) file server - backup
15) surge protecter, battery backup (cable, phone, electrical, lan)
16) cable try (metal studs)
17) outlets (ethernet, phone, cable)
18) cable ties.
Schematic.pdf(612x792) 134 KB

Step 2: Tools Used

1) Wire cutters,
2) Wire stripper for coax, phone, cat-5.
3) Wire spool holder,
4) Pop rivet tool,
5) Screw driver,
6) Wrench set,
7) cable ties

Building shelving not covered here but used the following tools:
1) Table saw,
2) Sander,
3) Scroll saw,
4) Electric drill,
5) Screw Drivers

Step 3: Assembly Details

Wiring (1).jpg
Wiring (2).jpg
Wiring (11).jpg
Wiring (4).jpg
Wiring (5).jpg
This picture shows the overall assembly and its parts.

Cut sheet rock window in the wall of a closet, dont' cut all the way through the wall, just back to the sheet rock on the other side of the wall,

The shelf is build in three sections that slides between the exposed wall studs. Build the shelves back into the wall opening that you created.

I used wood wall paneling (masonite) and MDF (1/2" to 3/4") to create these shelves. PVC tubing to route wires into attic.

Step 4: Installation Details

Here are details of the installation.
1-40 of 136Next »

well done

sofia215 days ago

well done


rohit548 days ago


money369 days ago

Great work and Idea

monika5410 days ago


arvindr12 days ago

great work

honey12113 days ago

well done


geet2116 days ago


tanvi78617 days ago

too good

well done

hanish78617 days ago


geetika78617 days ago

very good


well done

jyotisingh1 month ago


midnightfood2 months ago

good one

stevebhalla3 months ago

very well done

BARNABASSABA6 months ago

Great project thb43... Only a Wel Experience and Hardworking persona can do this... Have U done any INDUSTRIAL TRAINING from any company or u just Read This over in Some Book and made it this well?????

thb43 (author)  BARNABASSABA6 months ago

Thanks. My experience is BSME & BSCS from University plus 25 years working in these fields.

Great project, very well organized! So, I'm searching this Coaxial connector 90º, but I don't meet here.. Where you bought it? Thanks!

thb43 (author)  Cristian Augusto7 months ago
Found them on ebay cheap... and they were pretty low quality though... as soon as you tighten them up they broke pretty easy.. When the cable truck came to my house the installer hooked me up with a hand full of higher quality 90s.

Oh, and have you a ideia where I can find this connectors with better quality?

thb43 (author)  Cristian Augusto7 months ago

dbrown758 months ago
hi I've been looking up stuff like this for awhile now and i was wondering if there it any way to wire the electrics to a wifi controlled system any useful tips?
thb43 (author)  dbrown758 months ago

You just need to plug in a WiFi Access Point or WiFi enabled router and any wireless device will be able connect to the network. Make sure you enable the WiFi encryption to keep those that don't know the SSID/password from accessing your network. For further security you can set MAC address filtering to prevent any wireless device connecting unless its MAC address is programmed into the system even it knows the password. When configuring/controlling your router its not recommend to do this via a wireless connection (but it is possible).. always do this with a connection that is hardwired to the router otherwise you will probably loose connection when you start setting up IP addresses and end up connecting the cable to the router anyway. I always set static IP address for printers, servers, cable boxes, TVs, playstation, pools, file servers and other services and let DHCP dynamically set IP addresses for laptop, computers, mobile phones that are not always connected to the local network.

powerndata1 year ago
Hey, great work. You have chimed in with some tips for people who want to do their own wiring system. We must employ the most experienced techniques and use the highest quality equipment.
bfollowell2 years ago
Awesome guide. I'm curious, what amplifiers do you use and what program did you use to create your schematic?

Thanks for sharing.
thb43 (author)  bfollowell2 years ago
Thanks... Actually I changed services last year from Time Warner cable to Verizon FIOS so I don't use an amplifiers anymore. It has a much stronger signal. I was using 20dB amps from Ce Labs which worked fine (as long as TW cable was working). Found them on ebay. I used AutoCAD for the schematic.
jimbarbera2 years ago
Very impressive setup!
I'm using blue jacketed Cat 6 for all Ethernet and gray jacketed Cat 5e for all phone wiring.

For the phone I'm using the blue pair for line 1 but which color pair should be the DSL (U-Verse) modem pair? I'm currently using the brown pair from the POTS splitter, but can easily change it to green or orange.

I am connecting only the pair that is leading to the modem so as to avoid any "stub outs" to other locations in the house.

laxap2 years ago
Wonderfully clean setup. I like how the cables are nicely bundled.
rschlitz2 years ago
Hyper awesome guide. I'm not planning to do this but it was a really interesting read.
(removed by author or community request)
thb43 (author)  pratyushpmhptr3 years ago
1) Surge protection... no you don't have to have surge protection for LAN cables or phone outlets... they work just fine without. Having said routers seem to be a lot more stable now that I am using a surge protection and power conditioning.... I haven't had to reboot the router nearly as much as without it. Most surge protectors have connections for LAN and phone so I use them both. It just good peace of mind too know that my expensive equipment is protected. One other thing... when lightening hit my grandfathers house the phone out back in the barn was blown off the wall. He didn't have surge protection.... it may have helped.

2) improperly grounded, bad amp, ESD, TV still turned on while making the connection... could be many things shocking you. I'd get it checked out.

3) readyNAS (Netgear's version of Network Attached Storage) looks pretty good. Cost and performance were deciding factors for me. My Buffalo system has been running non-stop since installed with no problems... the GUI is a bit clunky though.

I'm happy you enjoyed my instructable.... there's a lot of information here and I'm happy to share it. with everyone. I have learned a lot of things from the internet and this was my chance to give back and help out others. Enjoy!
nasrudiin3 years ago
Thank you so much for the instructions but really like to know I know you already mentioned. Is there any specific shop you can get the tools or just go shopping?

Thank you
thb43 (author)  nasrudiin3 years ago
buy the tools anywhere... sears, home depot, walmart, lowes, frys, etc.
abadfart4 years ago
 ok so i got it all set up but one of the computer has limited to no connection and my xbox is not registering at all.  i know i wired it right but they aren't working any ideas? 
thb43 (author)  abadfart4 years ago
Could be many different things.  I don't know from the limited info you provide.
If you are using static IP addresses on these devices they may be set to the same IP address so neither one will work correctly.  If you are using DHCP server then make sure the number of addresses in the IP address pool (i.e. starting address to ending address) includes enough IP address for all the devices on your network.
1-40 of 136Next »