With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
first you must find a disposable camera. I think I used one with the brand name kodak. the reason this works is because of a component in the camera c...
this step is very easy. you just remove the cardboard/ paper from the camera and pry open the two plastic pieces that make the housing for the camera....
to take the picture many disposable cameras have a series of gears that must be turned in order to prepare the camera to connect two leads. all of the...
the only thing (other than the covers if you are going to use them to build the housing) you need from the camera is the circuitry. when you remove it...
behind the cover for the flash there should be a thin glass cylinder that is about 2 cm long and is connected to two copper leads on either end of it....
the copper leads that used to be connected to the light bulb will be where the two wires of the actually stunning part are attached. take two insolate...
on the camera that I used there were two pieces of metal that went to the shutters that were not connected. using a wire about 5 cm long stripped abou...
to make sure it works, go to an area with no flammable items, put in the battery charge the flash, and holding a coin in pliers touch it to the two ex...
I used the two covers originally on the camera to make the housing, but you could make housing out of anything plastic (so long as it is an insulator ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »