Introduction: Knex Sturdy Hard and BIG Rubber Band Gun (rbg)!

Picture of Knex Sturdy Hard and BIG Rubber Band Gun (rbg)!

my 1st instructable!
it might be a bit confusing! -_-

Step 1: Barrel Thingimobob?

Picture of Barrel Thingimobob?

build this to be a 1/2 of the trigger.

Step 2: Boady1

Picture of Boady1

first bit of the boady.

Step 3: Boady2

Picture of Boady2

second bit of the boady. then put together

Step 4: Point Root

Picture of Point Root

the route of the point.

Step 5: Pointage

Picture of Pointage

this determines the stretch of the rubber band.

Step 6: External Magezine

Picture of External Magezine

ext mag.

Step 7: Other Trigger

Picture of Other Trigger

other trigger.

Step 8: Bottom Compound Bridge

Picture of Bottom Compound Bridge

makes it more sturdy. attatch to pointage.

Step 9: Attatchment

Picture of Attatchment

the external mag attatches with the semi trigger the semitrigger attatches to the (boady1 + boady2= full boady).
full boady attatches to root point, that attaches to pointage
then the pointage can be re-inforced and decored.


erikos kostarikos (author)2010-04-15

Kinda strange structure but the trigger mechanism is very nice.

knektek (author)2008-12-26

I am very sorry for the inconveniance i will try to make the pics better

pls (author)2008-12-14

The pictures are hard to see, Try turning the flash off but have some lights on for a more clear pic

About This Instructable



More by knektek:PVC pipe scytheKnex Sturdy Hard and BIG Rubber Band Gun (rbg)!
Add instructable to: