Print PDF
Favorite
Email
Step 4Assembly!
1.) You are going to thread the screws through their respective holes now. To prevent damage to surface, do so as follows:
ScrewHead-->1"Metal Washer->-Mesh Rack-->1" Rubber Washer-->Surface-->1/2" rubber washer-->Hex/Bubble-head nut.
2.) Use the Mini screw driver, and either a socket set, or a wrench to tighten down your screws and nuts. Make as tight as you can. The rubber washers might need a little more tightening than you might be used to.
3.) Enjoy!. Place your equipment in the newly mounted Mesh Basket.
ScrewHead-->1"Metal Washer->-Mesh Rack-->1" Rubber Washer-->Surface-->1/2" rubber washer-->Hex/Bubble-head nut.
2.) Use the Mini screw driver, and either a socket set, or a wrench to tighten down your screws and nuts. Make as tight as you can. The rubber washers might need a little more tightening than you might be used to.
3.) Enjoy!. Place your equipment in the newly mounted Mesh Basket.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
