Print PDF
Favorite
Email
Step 5Notes
1) The VURMs are made of stainless steel and are thus quite resistant to scratches.
The Lersta however, is made of aluminium, so take care not to scratch it with tools or sharp objects.
2) The pipe mounts may not be of the appropriate diameter in order to fit tightly on the tube. In my case I put small pieces of self-adhesive foamy tape. In this way everything had become quite sturdy and also prevented any damage (scratches) to the aluminium tube.
3) Although the room inside the lamp is quite limited, you will be able to change a bulb without dismanlting the lamp, by inserting your arm from underneath.
The Lersta however, is made of aluminium, so take care not to scratch it with tools or sharp objects.
2) The pipe mounts may not be of the appropriate diameter in order to fit tightly on the tube. In my case I put small pieces of self-adhesive foamy tape. In this way everything had become quite sturdy and also prevented any damage (scratches) to the aluminium tube.
3) Although the room inside the lamp is quite limited, you will be able to change a bulb without dismanlting the lamp, by inserting your arm from underneath.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
