As a note, I made this prototype with the concept of making more with better materials. I have a slew of ideas and creations, but I wanted to get a better grasp on how easy it is to build them.
So, here are my notes on how I built my first living art 12"x12" frame box.
Remove these ads by
Signing UpStep 1: Materials
Tools: Table saw, finish nail gun, wire snips.









































Visit Our Store »
Go Pro Today »




http://www.etsy.com/shop/SANPEDROCACTUS
cheers
Could you tell what kind of plants did you use? Because I've seen them in Spain and since then I'm courios what was it :P They're very nice (those with leaves looking like flowers).
Thanks!
Thank you!
http://shop.floragrubb.com/vertical-succulent-garden-d-i-y-panel/
My suggestion would be that at the top --drill 2-3 holes slightly towards the back in order to water the plants-- We left our tops open and inserted PVC tubes- bottom closed- and drilled very small holes up and down the sides- which helped to get the water down to the bottom...
Great Job!
And I would use MORE moss than dirt, and just spritz with the hose in the hot summer once in awhile. I guess you do need to take it down once in a blue moon to water & feed it..... but just let the moss dry in between waterings.
I use MIracle Gro in a very weak solution.
Just to clarify, thin or thick? I figure thin but want to be clear.
I first saw this technique in a major magazine... and I have always like it.
I live in Florida and yes I still need to shelter or cover my succulents in a freeze that lasts more than a short time.
If you have any old wooden drawers, you can use them as well.
Oh yeah, why do you caulk the seams? I am thinking to hold the box frame together? I still would recommend drilling some air holes in the bottom. \
I do love this idea and a good one to build your own frame.
Ugh... sorry, I get a bit spacey when it comes to stuff like that.
Great instructable by the way! I may have to try this one. I wonder if it would be possible to make a more temporary wall art from cut flowers? Make a box and some how water-proof the sides (possibly make it out of plastic) then use the florist foam stuff (the fine gritty textured stuff [ewww! hate the feel] usually a green color). I guess you could decrease the depth of the box? Do you think that would work? Anyways, fantastic idea and Instructable!
I plant to construct a few planters that you can hang on the wall. Think planters to put flowers in that look modern and whatnot. I'll do an instructable on those, but they will be pretty easy to make. I love the modern look, so I would like to make them out of a darker concrete material. Possibly a dark gray plaster with epoxy on it or something of the sort. Anyway, I'm rambling now!
Thank you for the feedback!
That way, the moisture in the soil wont drain towards one side all the time, which may leave the plants at the top a bit dry.