Print PDF
Favorite
Email
Step 2Weed
Now you need to weed out all of the pieces where you want sun screen to be sprayed (white skin). I weed with the same #16 x-acto blade that I cut with. I pluck the edged of the piece I'm trying to get out in order to lift it up. I then pull the rest of the piece up by hand. You need to be careful not to pull up surrounding pieces because they usually don't just come apart without a fight.
If you're hoping to have the actual graphic part burn then you should remove all the vinyl around what you drew. (example below)
If you're hard core like my friend you can remove the graphic so that everything else burns leaving a white image. (see step 4-10)
If you're hoping to have the actual graphic part burn then you should remove all the vinyl around what you drew. (example below)
If you're hard core like my friend you can remove the graphic so that everything else burns leaving a white image. (see step 4-10)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
