Print PDF
Favorite
Email
Step 3Application Tape
I use RTape clear conform high tack. I think that a lower tack would be better for applicaton to skin so that the vinyl has a chance to adhere without getting lifted up.
place your application tape sticky side up and then put your weeded vinyl sticker face down on top. Press from the center out evenly so that there are no air bubbles. Finally cut excess tape off.
Now you're ready to apply your vinyl sticker.
(The sticker shown is the type you'll want to use if you're trying to maintain a healthy body without skin cancer. The type shown later in this instructable is the painful inverse of this. )
place your application tape sticky side up and then put your weeded vinyl sticker face down on top. Press from the center out evenly so that there are no air bubbles. Finally cut excess tape off.
Now you're ready to apply your vinyl sticker.
(The sticker shown is the type you'll want to use if you're trying to maintain a healthy body without skin cancer. The type shown later in this instructable is the painful inverse of this. )
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
