Customize Shoes with Spray Paint and Sugru

Step 5 Treads

Update:  The treads are coming off, and I suspect 1 of 2 things:  I should have sanded the bottom of the shoe more (maybe used a Dremel), or Sugru cannot adhere to the type of plastic used on this portion of the shoe.  If you try this, sand it hard.  If it fails, the worst is you'll have wasted a couple packs of Sugru.

Smoosh 1 packet of Sugru on the bottom of the shoe.

Note:  It's going to be spread very thin, but creating valleys will also create ridges.

Create treads by running a butter knife through the Sugru.

Allow to cure for 24 hours.

Repeat for other shoe.