Print PDF
Favorite
Email
Step 5Compressor
The original compressor was about 1/10 horse, the new one is 1/4 horse. Fits on the same mounts, though!
We added that coil of copper tubing above it to prevent the compressor drawing liquid from the evaporator.
We used the original cap tube, as the chart called for 43" of #1 & we had 60" of #5. I calculated them out to about the same volume. So it should work?
We added that coil of copper tubing above it to prevent the compressor drawing liquid from the evaporator.
We used the original cap tube, as the chart called for 43" of #1 & we had 60" of #5. I calculated them out to about the same volume. So it should work?
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
1
Jul 16, 2009. 3:39 PMheaddead
says:
Got a link to the chart?
Reply
 |
Add Comment
|
