Super iPod

Step 1 Super IPod : Materials

- one large white fabric sheet 31" x 40"
- one gray fabric sheet 21" x 12"
- one white felt sheet 5"x 1 1/2"
- one gray felt sheet 1 1/2" x 1 1/2"
- ten black felt sheets 2" x 2"
- five purple felt sheets 2" x 2"
- ten conductive fabric sheets 3" x 1/2"($16.25 line/ft)
http://www.lessemf.com/fabric.html
(You can buy the small size of "Zelf" conductive fabric from Less EMS)
- handmade felt wires
(They are attached to two thin and long conductive pieces of fabric on the felt. You can make the handmade wires by yourself, check "How to make fabric wires".)
- an already hacked mp3 player ($15 COBY mp3 player at J&R)
(This hacked mp3 player consists of a base and the electronics of the mp3 player and it can be detached from the pillowcase because the snaps on the base and the mp3 player allow the mp3 player to separate. You can hack the mp3 player yourself by following instructions "How to hack mp3 player" "How to make detachable mp3 player kit". )
- one super bright LED
(To indicate the mp3 player is on and working, you need one super bright LED. We put this in the mp3 player in the kit.)
- conductive thread($15 per spool)
http://members.shaw.ca/ubik/thread/order.html
(Conductive thread can convey current and regular thread won't.)
- regular thread
- a sewing needle
- fabric glue
- a piece of chalk or a pencil
- a pair of scissors
- a multi-meter (to check the continuity of current, optional)

Comments

[PAULO98]

i made one.there cool

[sun]

Did you buy my kit or prepare materials by yourself? Could you share the picture of your Super iPod? Sun