Instructables

Step 2: Assembling

I started off assembling the sides by taping them together (in a pattern like the one below), then I taped on only one side. I put a little bit of glue on the seams inside, and let it dry for a bit, and then I filled the inside with a combination of cardboard scrap and hot glue, to give it some weight. I let that dry, and added the top, cutting it so it would fit inside nicely, and taped and glued that in place too.
 
Remove these adsRemove these ads by Signing Up
loserpoo4 years ago
really cool i wish i had balsa
TechNerd1012 (author)  loserpoo4 years ago
Thanks...you can get a long narrow sheet of it at any craft store, such as Michaels or Joanns or something like that
ceschiutti5 years ago
could you also make little posts in the corners to glue the panels together? I imagine that bottom piece was tough to stay put.
TechNerd1012 (author)  ceschiutti5 years ago
yes you can. i made a few more of these afterward, and thats how I did it