Print PDF
Favorite
Email
Step 9Install servos
Super glue the servos to the bottom side of the plywood base and up against the servo / IR mount. It only takes a drop or two..
Route the servo wires through the holes in the servo / IR mount as shown.
Route the servo wires through the holes in the servo / IR mount as shown.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
1
Jul 3, 2009. 11:25 PMElliot says
says:
Awesome design. Is there a way to make this cheaper could i use a dc motor instead of the servo
Reply
 |
Add Comment
|
