Anyway time for disclaimer if you harm yourself or others with this (i.e. shock someone with a pacemaker or shock a pet bug or something) then do not come crying to me because if i bought a gun and accidentally shot someone i would not go and blame the person i bought it from. by making this you are accepting the fact that mistakes happen and that you may not in any way blame me for them. ok boring disclaimer aside, lets get to work.
Step 1: Supplies
1. A utility lighter
3. Duct tape
4. Electrical tape
6. Empty scotch tape rolls x2
Optional:this is optional but it makes this proect a WHOLE LOT EASIER:
a good multi tool
Step 2: Getting the shocker (piezo-kinetic generator)
First, take off the black plastic ring between the metal material and the plastic. (just grab it with pliers or something and take it off.)
Next, take a piece of thin metal or knife or scissors blades and put it in between the two pieces of plastic.
Work your way around the lighter, and pry off one of the plastic parts.
Inside, there will be the lighter, and the red wire running inside of the black plastic tube.
Simply pull it out and take out the shocker.
Now you are done with this step :)
If you would like to know, the shocker works by hitting a piece of quartz with a spring-loaded hammer. when you pass electrical current through quartz, it distorts, and when you distort it, it releases electrical current which is what you feel when shocked.
Step 3: Finishing the shocker
Take a length of wire and split the ends with scissors (pics 1-3)
Now, take one of the wires and strip both ends.
Now, take one of the ends nd wrap it around the metal cylinder on the shocker, and electrical tape it.
Look on the sides of the shocker. You'll see little pegsinside of the black plastic housing (pic 13)
Cover them with electrical tape, or they will shock you. (pic 11)
(pic 12)if you want, you can tape the ends of that pink tube around the red and yellow wire to keep it in place.
Step 4: Putting the shocker in a housing
First, tape two empty scotch tape rolls together. Make a hole in the side, put in the shocker. Wad up some duct tape and put it behind the shocker, because the scotch tape rolls are too wide. Now, make some more duct tape wads and fill the housing. Duct tape or electrical tape all around the housing, You see my duct tape one, i made one with a layer of duct tape and a layer of electrical tape to look cool.
Bic pen method: Take a bic roundstic pen or something similar and take out all the insides, and the end cap. Put the metal cylinder and the wire taped to it inside the pen tube and pull it through, and the other wire will be wound around the outside. Tape both of them to the top, tape the shocker to the pen, and cover everything in electrical tape.
Step 5: Final step: using the taser
fun game: gather all the friends you can into a line, holding hands. grab onto the first person, and shock yourself. see how many people feel the shock.