Super Special Laptop Sleeve (**With Updates**)

Step 4 Sew It Up

1. Position the fabric right sides (transfers) together so that the transfers are aligned however you want them to end up (I wanted mine centered)
2. Pin along the two short edges and one long edge (basically making a big pouch). For nice corners, pin and sew them on an angle - this will make them slightly rounded when they're turned right sides out
3. Sew these edges
4. Roll over a seam along the open side of the fabric and pin
5. Sew the seam
6. Trim the seams down a bit if there's a lot of extra
7. Turn right sides out
8. Slide in your laptop

FIN!