A crossbow made out of k'nex that shoots paper clips.
WARNING: THIS CROSS BOW IS VERY DANGEROUS, IT SHOULD BE TREATED WITH GREAT CARE AND RESPONSIBILITY, I AM NOT LIABLE FOR ANY DAMAGE CAUSED BY THIS WEAPON.
P.S this is my first instructable, please bare with me.
Step 1: What You'll Need.
2 single slotted dark grey pieces
2 red sticks
1 light grey 2 slotted piece
and 1 rubber band ( about medium size, larger than the one in the picture)
a couple (small) paper clips (colored paper clips would be good)
Step 2: The Crossbow (rubber Band)
Tie a knot (well, its kinda like a knot) using a rubber band on the Grey k'nex pieces ( shown in picture 2).
Step 3: The Crossbow (rubber Band)
First, connect the 2 red sticks to the 2 slotted light grey piece. Then connect the rubber band piece(s)
onto the top of the red sticks.
Step 4: The Ammo
Take the paper clip and bend it as in picture 2, then finish bending it like in picture 3.
Step 5: Loading and Fireing
Put the curved part of the paper clip onto the rubber band, then put the long bent part of the paper clip through the bottom hole of the light grey, 2 slotted piece. To fire turn it upside down, then press down on the part of the paper clip sticking up. If it does not fire retry, or turn upside up and nudge the paper clip up.