Step 2: Chop shop time
*With cables unplugged*
Figure out how much cable you'd like to have left AFTER the split and add an inch to that and CUT the AC leads as close to the same length together.
Then snip an extra length from the LONG piece left (with the plug on it) for your AC lead
Cut / unzip about an inch on the cut ends of each new figure-8 tail and the same on both ends of the bulk cable tail.
Figure out how much cable you'd like to have left AFTER the split and add an inch to that and CUT the AC leads as close to the same length together.
Then snip an extra length from the LONG piece left (with the plug on it) for your AC lead
Cut / unzip about an inch on the cut ends of each new figure-8 tail and the same on both ends of the bulk cable tail.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
