Print PDF
Favorite
Email
Step 7Epoxy & Cover
I used epoxy putty to encase the entire junction. This should help with strain relief as well as insulation. Keep it neat and cover it evenly before the epoxy hardens. Make sure the 3/4" heat shrink cover can fit over the epoxy covered joint.
Once the epoxy has hardened, finish off the SuperSquid with the final heat shrink cover.
Once the epoxy has hardened, finish off the SuperSquid with the final heat shrink cover.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
