Print PDF
Favorite
Email
Step 3Assembling.
Picture 1
Assemble the T-piece. This picture shows the hinge in one position. From this position it can only rotate clockwise (the other direction is locked).
The width of the base of the T-piece (the part that rests on your chest) should be slightly larger than the width of your camera. In my case: 180 mm.
Picture 2 & 3
T-piece with the hinge in both positions.
Glue the vertical pipe. The other pipes don't have to be glued or at least glue them once you're confident about the set-up. Be aware of the orientation of the slots with respect to the T-piece!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
