Instructables

Swan Carved From an Apple

Featured
My friend's mom made this once as the centerpiece for a fruit tray and I took a crack at it. So now I am here to show all of you do it as well! :)
 
 
Remove these adsRemove these ads by Signing Up

Step 1: What You Need

Picture of What You Need

You will need:

a good sized apple

a sharp paring knife

and a cutting board

Step 4: Cut Another Wedge

Cut a smaller wedge out of the one you just cut leaving about a quarter of an inch of the first wedge.

Step 5: Cut Yet Another Wedge

Cut a smaller wedge from the wedge you just cut so you have sizes resembling the picture. Repeat steps 3-5 for the other side making sure to leave some uncut apple (3/4-1 inch is good).

Step 6: Assemble Wedges

Picture of Assemble Wedges
IMG_1174.jpg
Assemble your wedges as seen in the picture and place them on the body.

Step 8: Cut a Hole


Cut a small hole for the head in the body and stick the neck in there. You now have an apple swan! (you may want to sprinkle it with lemon juice to preserve it)
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!