Introduction: Sweet Flyer
This little candy airplane is a perfect Valentines treat for a future pilot!
Step 1: Materials
Rockets ( I believe in the USA they are called Smarties)
A stick of gum
2 life savers
A twist tie
2 small rubber bands
A piece of string
And some paper
Step 2: Tools
The tools you need are a pencil a scissor and a hole punch
Step 3: Tie Tie Tie
First you need to tie the rubber bands together. To do this you thread the one through the other one(first picture), then you pull the one end so it looks like the second picture. Then just pull it tight.
Step 4: Add Wheels and Wing
Then thread the the rubber bands through the life savers. Stick the gum through one end then the other so it looks like the third picture.
Step 5: The Body
Just pull the life savers apart and slide the rockets in.
Step 6: Done the Airplane!
Simple as that! Your done the airplane, but if you want a valentine read on.
Step 7: The Banner
Cut a pice of string long enough to tie a knot three times. Cut the banner out of paper then punch the hole. Tie the string onto the end of the rockets then tie the string through the hole.
Step 8: Your Done!
Take your pencil and write your sweet message. Congratulations you are done!
We have a be nice policy.
Please be positive and constructive.