Introduction: Sweet Revenge


 This is a pretty fun gun :)

Features:
- Great range
- Removable mag
- True trigger
- Comfy handle
- Very sturdy
- Looks Awesome!

i hope you like my gun, please subscribe!!
Thankyou :D



Step 1: Read :)

 I formally apologize for the quality of the pictures :( I do not have a camera to use except for this cheap video camera. the camera i used to take the pictures for the intro was my neighbor's camera.
So good luck building and read the image notes, they will help.

Step 2: Step One

 This is step one. Read all the image notes :)

Step 3: Step Two

 This is step two. Read all the image notes :)

Step 4: Step Three

 This is step three. Read all image notes :)

Step 5: Step Four

 This is step four. Read all image notes :)

Step 6: Step Five

This is step five. Read all image notes :)

Step 7: Final Step

 Add a rubber band onto the mag and make sure the mag is in GOOD. If not go back to that one step and add more tape. The mag must be in firm. Sometimes the rubber band on the mag wont completely push up the blue rods. If that happens just push them up using your hand :)

Have fun and remember to always shoot at family members and other living objects. 

HERES YOUR COOKIE!!!!!!

Step 8: Who Has Built the Gun??


 Picture Number:

1.  KnexFreek's 

2.  KnexMaster7000's

3. knex_builder_freak's

4. Kenexinator's

5.  Ikedog1995 BUILT TWO!!!!!

6.  Pretty P's

7.  Abused Waffle's

8.  Muffinslayer2's

9.  mikstr2's 

10. Starfrog6's

Comments

author
hawk45 made it!(author)2012-12-28

beastly!

author
fishbob1234 made it!(author)2012-08-03

you made me scratch my computer screen >:(

author
fishbob1234 made it!(author)2012-08-02

looks awesome 5*! with i had eneugh yello connecters though.

author
Element+Force made it!(author)2012-06-27

if you haven't break the gun hopefully can you tell me how many yellow connectors does the gun have

author
knexboy586 made it!(author)2012-05-31

READY FOR AN APACOLIPZE 5*

author
rlaxrlax made it!(author)2011-09-21

looks awesome 5*

author
%7EKnexBuild%7E made it!(author)2011-09-08

looks cool 5*

author
msmith46 made it!(author)2011-07-30

gave up unfortunatly due to having gotten to certain bits many times and then something has changed or somethings been missed out :( looks like a good gun tho

author
wiiking2015 made it!(author)2011-07-11

how the h*** does the f****** mag work

author
jake+scythe made it!(author)2011-06-24

instead of putting the orange connectors in the front on the top i left a space so i could put in a removeable safety. I do it with all of the guns i make.

author
glugnar made it!(author)2011-05-14

You know, it would be really helpful if you say that you need this blue/gray connector part so somebody like me doesn't waste an hour just to find out you dont have all the parts. -_-
*_>*Glugnar*<_*

author
glugnar made it!(author)2011-05-14

So many y-connectors :(

author
dwksideas made it!(author)2011-05-07

may i ask how o you aim when it has the three grey connectors in the front and hpw good i the acurasy on this gun

author
xXFor_The_WinXx made it!(author)2011-05-10

Its not a slingshot it fires through the barrel

author
mford+lee made it!(author)2011-04-28

found it

author
KnexFreek made it!(author)2011-04-29

okay good :)

author
mford+lee made it!(author)2011-04-28

ive got the blue part but not the part it connects to

author
SomeAsianKid made it!(author)2011-04-08

Do you need the stock? If not can you post one without it?

author
DracoUltima made it!(author)2010-12-30

Darn.....I should've taken a picture of the gun when I had it.....it had some really good mods on it.....

author
DracoUltima made it!(author)2010-12-27

For the ****ing love of!!!!???? Why does EVERY good ramrod gun HAVE to have a TON of blue rods sticking out?! Are there ANY knex rods for sale that only have 5 spaces??? Oh by the way, very nice gun, extremely satisfied, well, maybe except for the handle but I fixed that. I did somewhat manage to fix the problem stated above by adding another layer to the gun, but I found it to be a waste of pieces. I also found that filling the space at the front of the gun does not change much..... So congratulations, 5*.

author
bobbyhonkers made it!(author)2010-11-13

what lengt should the ram rod be

author
KnexFreek made it!(author)2010-11-26

gray lrngth. but use a black rod

author
bobbyhonkers made it!(author)2010-11-26

k thx

author
knexkeiron2010 made it!(author)2010-10-17

I'm hungry (all cos of ur cookie)

author
KnexFreek made it!(author)2010-11-23

:)

author
lichking made it!(author)2010-11-06
author
knexkeiron2010 made it!(author)2010-10-17

I built this gun it's awesome!! I got my knex banned for a week cos of it :( it was torture

author
KnEx_MaStEr made it!(author)2010-10-09

kinda nice i had 2 hav it single shot though :(

author
numro_xi made it!(author)2010-09-27

ok, i'm confused - can you wither say, or post another photo lengthways from the back so i can see the layers at the back, a load more just seem to appear at start of step 5 without any instructions?

thanks in advance.

author
novakfor3 made it!(author)2010-09-03

I don't get the step where you add all the grey connectors, other body shell mysteriously appears? And adding the other part of the handle?

author
knexpete made it!(author)2010-07-26

Holy cheeseball! It sounds like a real gun!

author
Smasher555 made it!(author)2010-09-01

cheeseball?

author
knexpete made it!(author)2010-09-02

substitute for a swear word

author
Kip3300 made it!(author)2010-08-10

I made the gun verry well but i dont understand how the mag works and how he locks into the gun + how u need to place the rubber band, plz help me!

author
Smasher555 made it!(author)2010-07-27

It looks completely identical to Oblivitus' full or semi auto oodammo slingshot gun!

author
SNIPERDUDE made it!(author)2010-04-09

Hmm, shame I couldn't see the workings and innards of the gun.  I take interest in the small little details and mechanics 95% of people, even K'nex gun builders, miss.  I got an idea or two from your's, maybe it's high time I make a new hybrid gun.

Keep up the good work,
Leo

author
KnexFreek made it!(author)2010-04-09

 Cool! Thankyou, I thik you may be extremely ipressed with the gun called the Tank bow And The gun called the freekiller repeating crossbow. They are insane. Oh and the freeslinger !! Thats another awesome gun

author
SNIPERDUDE made it!(author)2010-04-09

I have, thank you.
While all wonderful creations, I don't think I can take anything from them.
My new creation will be a medium-sized gun with detachable magazine, near frictionless design (power is only determined by the maker's rubber bands.  This aims to use up all potential stored, with no loss in kinetic energy at all), and perhaps pump action.  And as always, it shall be built ground-up, leaving looks behind.

Cheers!

author
knex_mepalm made it!(author)2010-04-13

 Wow, that sounds hard. What about a knex-magnetic gun. A neodynium magnet could be fired upod a knex piece which will transfer energy to the next step, doubling the kinetic energy every time. It will make it fly out at speeds unable from Rubberbands. I'm working on my, its hard.

author
zeroxityx made it!(author)2010-07-13

killerk came up with that 4 years ago and couldnt make it! neither could i! i hope ya can :0

author
knex_mepalm made it!(author)2010-07-26

Nah didn't work. It didn't work, I finally melted the piece with the magnet in the middle but the shoddy design threw the balance off, at most it shot about 120 feet, when I was lucky.

author
Seleziona made it!(author)2010-07-15

wow, that would be amazing..

author
SNIPERDUDE made it!(author)2010-04-13

Well, I have an initial design in mind, and a working prototype of this mechanism.  The next major steps are the detachable magazine, and the pump-action loader.
I am curious as to how well your magnetic design works.

author
knex_mepalm made it!(author)2010-04-13

I would like to explain, but here is a more simpler approach.
http://scitoys.com/scitoys/scitoys/magnets/gauss.html

As the web site explains I plan on putting it inside a knex gun, and the ball will not be released but shot by rubberbands. And the balls replaced by neodynium magnets if possible. I will work hard, but I am terrible at guns but initally good at new ideas. So the rail will be inside the gun, and the gun is not 100% knex but rather a hybrid. I am hoping for it to rech speeds up to 400 fps for testing or rodent killing.

author
mini+grant made it!(author)2010-07-07

post pictures of under the top! for now 3 stars

author
sammyja made it!(author)2010-07-07

my ammo interlocks with my ram rod?

author
builder968 made it!(author)2010-07-03

Muffinslayer, do you have xbox live? I saw your headset and controller.

author
builder968 made it!(author)2010-07-03

I'm sorry, but when I rated it 5*, it went down from 4.07 to 4.05. How does that happen?

author
Mace%21 made it!(author)2010-06-20

Show how to put the magazine rubber band on.

author
superawesomekid78 made it!(author)2010-06-19

It wont let me publish an instructable. can you help me? my email is Gahoolian522@gmail.com.

About This Instructable

6,942views

29favorites

License:

Bio: Hi im kevin! i make stuff =] Kthanksbye =D
More by KnexFreek:Coin Operated Knex Gum Ball Machine!The Final Stand.Sweet Revenge
Add instructable to: