Instructables


 This is a pretty fun gun :)

Features:
- Great range
- Removable mag
- True trigger
- Comfy handle
- Very sturdy
- Looks Awesome!

i hope you like my gun, please subscribe!!
Thankyou :D



 
Remove these adsRemove these ads by Signing Up

Step 1: Read :)

Picture of Read :)
 I formally apologize for the quality of the pictures :( I do not have a camera to use except for this cheap video camera. the camera i used to take the pictures for the intro was my neighbor's camera.
So good luck building and read the image notes, they will help.

Step 2: Step One

 This is step one. Read all the image notes :)

Step 3: Step Two

 This is step two. Read all the image notes :)

Step 4: Step Three

 This is step three. Read all image notes :)

Step 5: Step Four

PIC_0823.JPG
PIC_0824.JPG
PIC_0825.JPG
 This is step four. Read all image notes :)

Step 6: Step Five

PIC_0819.JPG
PIC_0820.JPG
This is step five. Read all image notes :)

Step 7: Final step

 Add a rubber band onto the mag and make sure the mag is in GOOD. If not go back to that one step and add more tape. The mag must be in firm. Sometimes the rubber band on the mag wont completely push up the blue rods. If that happens just push them up using your hand :)

Have fun and remember to always shoot at family members and other living objects. 

HERES YOUR COOKIE!!!!!!
1-40 of 372Next »
hawk451 year ago
beastly!
fishbob12342 years ago
you made me scratch my computer screen >:(
fishbob12342 years ago
looks awesome 5*! with i had eneugh yello connecters though.
if you haven't break the gun hopefully can you tell me how many yellow connectors does the gun have
knexboy5862 years ago
READY FOR AN APACOLIPZE 5*
rlaxrlax2 years ago
looks awesome 5*
~KnexBuild~2 years ago
looks cool 5*
msmith463 years ago
gave up unfortunatly due to having gotten to certain bits many times and then something has changed or somethings been missed out :( looks like a good gun tho
wiiking20153 years ago
how the h*** does the f****** mag work
jake scythe3 years ago
instead of putting the orange connectors in the front on the top i left a space so i could put in a removeable safety. I do it with all of the guns i make.
glugnar3 years ago
You know, it would be really helpful if you say that you need this blue/gray connector part so somebody like me doesn't waste an hour just to find out you dont have all the parts. -_-
*_>*Glugnar*<_*
glugnar3 years ago
So many y-connectors :(
dwksideas3 years ago
may i ask how o you aim when it has the three grey connectors in the front and hpw good i the acurasy on this gun
Its not a slingshot it fires through the barrel
mford lee3 years ago
found it
KnexFreek (author)  mford lee3 years ago
okay good :)
mford lee3 years ago
ive got the blue part but not the part it connects to
Do you need the stock? If not can you post one without it?
DracoUltima3 years ago
Darn.....I should've taken a picture of the gun when I had it.....it had some really good mods on it.....
DracoUltima3 years ago
For the ****ing love of!!!!???? Why does EVERY good ramrod gun HAVE to have a TON of blue rods sticking out?! Are there ANY knex rods for sale that only have 5 spaces??? Oh by the way, very nice gun, extremely satisfied, well, maybe except for the handle but I fixed that. I did somewhat manage to fix the problem stated above by adding another layer to the gun, but I found it to be a waste of pieces. I also found that filling the space at the front of the gun does not change much..... So congratulations, 5*.
what lengt should the ram rod be
KnexFreek (author)  bobbyhonkers3 years ago
gray lrngth. but use a black rod
k thx
I'm hungry (all cos of ur cookie)
KnexFreek (author)  knexkeiron20103 years ago
:)
lichking3 years ago
I built this gun it's awesome!! I got my knex banned for a week cos of it :( it was torture
KnEx_MaStEr3 years ago
kinda nice i had 2 hav it single shot though :(
numro_xi3 years ago
ok, i'm confused - can you wither say, or post another photo lengthways from the back so i can see the layers at the back, a load more just seem to appear at start of step 5 without any instructions?

thanks in advance.
novakfor33 years ago
I don't get the step where you add all the grey connectors, other body shell mysteriously appears? And adding the other part of the handle?
knexpete4 years ago
Holy cheeseball! It sounds like a real gun!
cheeseball?
substitute for a swear word
Kip33003 years ago
I made the gun verry well but i dont understand how the mag works and how he locks into the gun + how u need to place the rubber band, plz help me!
Smasher5554 years ago
It looks completely identical to Oblivitus' full or semi auto oodammo slingshot gun!
SNIPERDUDE4 years ago
Hmm, shame I couldn't see the workings and innards of the gun.  I take interest in the small little details and mechanics 95% of people, even K'nex gun builders, miss.  I got an idea or two from your's, maybe it's high time I make a new hybrid gun.

Keep up the good work,
Leo
KnexFreek (author)  SNIPERDUDE4 years ago
 Cool! Thankyou, I thik you may be extremely ipressed with the gun called the Tank bow And The gun called the freekiller repeating crossbow. They are insane. Oh and the freeslinger !! Thats another awesome gun
I have, thank you.
While all wonderful creations, I don't think I can take anything from them.
My new creation will be a medium-sized gun with detachable magazine, near frictionless design (power is only determined by the maker's rubber bands.  This aims to use up all potential stored, with no loss in kinetic energy at all), and perhaps pump action.  And as always, it shall be built ground-up, leaving looks behind.

Cheers!
 Wow, that sounds hard. What about a knex-magnetic gun. A neodynium magnet could be fired upod a knex piece which will transfer energy to the next step, doubling the kinetic energy every time. It will make it fly out at speeds unable from Rubberbands. I'm working on my, its hard.
killerk came up with that 4 years ago and couldnt make it! neither could i! i hope ya can :0
1-40 of 372Next »