Step 3: build the circut

Tape the Annode of the LED to the positive (+) terminal of the battery. (See pictures1-2) connect the cathode of the LED to the positive (+) terminal of the SWITCH. (See pictures 2-3) connect the negitive (-) terminal of the SWITCH to the negative (-) terminal of the BATTERY. Test the circut by pressing the lever (or flipping the swich). The LED should light up.
not so cool....... bt use ful 4 beginners !!!
<p>It became a handy night light for my daughter. very useful i&rsquo;d say!</p>
be cool if it would turn on when it stuck to a metal building , just have to position the switch so the level is pressed when the magnet part is flush with the metal siding. <br>
Howdy, <br>Question about the momentary lever switch. Do you have a part number? I don't know what to google to find these kind of switches. I'm an absolute newb to playing with LEDs and want to use this switch with small edge lit display. <br>Thanks!
Don't forget you need a magnet for a LED Throwie! That's the whole &quot;Throwie&quot; Part. So you can throw them onto buildings to light it up!
But it is a momentary switch so you have to be holding it for it to light up. also I live in Mississippi, USA, and there arent very many big buildings to thow them onto. and if you do the super strict cops would probably arrest you.

About This Instructable


25 favorites


Bio: I make a lot of things and add my own twists to everyday objects. I would rather make something on my own than buy it ... More »
More by techturtle2: Techturtle2's lair A 30 second cat/dog toy! Tips & Tricks - back 2 school edition
Add instructable to: