: Let me first state that I stumbled on this Idea browsing through the edcforums
. There was a post a while back where user, shadeone had posted some pictures and a short tutorial on building one of these sweet little babies. Check out the original forums thread started by shadeone here
. I take no credit for originating this idea
, I've just documented my own experience building one. This is a modification to his original half micra design which allows me to keep the pliers and a few tools.
Also Stop by http://mathewmullen.com
for more cool projects.
Leatherman Micra - ( I used a cheapo Husky clone that I got at home depot for $2)
Keys - (be sure to make copies of them first)
Something to cut the keys with - (I used a Dremel with a cutoff wheel.