T-Shirt Rack ( with NeckSaver)

Step 4 Assemble Tops and Install

1. Assemble 12 tops, just like you did with the ends of the base.
2. Install them over the side pieces.
3. Tweak certain areas as required.

Now go find your 12 T-shirt rotation, and...

Comments

[Scrupulous]

Exactly. In fact, that's what I'll be doing with mine. I would recommend caulking the whole thing up if you do. (Thanks, E.S. that was on of my original intents. I decided not to "instructable" it that way because applying adhesive adds a few more concerns to an otherwise simple project, and because the casters cost a bit more.) Yeah, the caster elbows should withstand the stresses. It all depends on how much you want to spend.

[Elite sniper]

Now, you can drill each 90 deg. elbow at the base and add a plastic caster wheel to each corner and you got yourself a mobile T-shirt rack (so you don't have to lift the whole thing up, if you were to hang your Tees still damp out of the washer!!)