Introduction: T.A.R 21 Bullprup Rifle

Picture of T.A.R 21 Bullprup Rifle

hee I'm back with a new gun
it is a T.A.R 21 bullprup rifle (that meens that the mag is behind the handle)
i used the dunkis trigger system (slimd it)
i also used a nice cooking system you can easely put it in it don't fall out of the gun and you can easely put it out
i think it's never been used by anybody
i also used a very well rail system i think SK disigned it and i little modded it
some pros and cons
nice sliding trigger (dunkis)
nice rail system
comfy handle
comfy front grip
nice sight
new cooking mechanism
shoots white rods
the ram is a brown/ red rod
i only get around 30 feet


thank you


shazooo2u (author)2012-04-06

best tar 21 ive ever seen and also its called bullpup, not bullprup.

bhuty (author)2011-05-30

im building myown tar21 but i dont know how to make curved mag for the ammo (grey clip-green rod-grey clip) or how to get it to stay in the gun
help ppppppppppplllllllllllllllllleeeeeeeeaaaaaaaaassssssssssssseeeeeeeeeee!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

RedStark (author)bhuty2011-07-05

to get it to stay in the gun, just get a rod and slide it through the gun and into the mag
not sure about the mag tho
ask dutchwarlord if you can use his

MrSillyGuns (author)2010-08-18

How do I put this?..... FREAKIN' SWEET!

pwnagerownager (author)2010-01-10

there are so many viruses on this website...

TigerNod (author)pwnagerownager2010-04-06

Viruses? On Instructables? What do you mean?

TheEvilCookie (author)TigerNod2010-04-06

hi this is pwnagerownager. i mean that without an anti-virus lots of stuff was happening. like fake popups for downloads. nothing to worry about tho

TigerNod (author)TheEvilCookie2010-04-07

Ah, I see.

lazyboy13 (author)2010-03-12

you should make the stock a little bit bigger. 4.5

dutchwarlord (author)2009-12-31

give me one more weak
i promese

PiTBuLL892 (author)dutchwarlord2010-01-06

not telling you to rush it but how far are you into the instructions???

Don't listen to them.
Just take your time, if they wantto build it, it first needs to be posted.
And when it gets posted, that depends on you.
Just take your time man.

PiTBuLL892 (author)dutchwarlord2010-01-02

1 more question: how does the mag stay in?
does that tan connector hold it in?

dutchwarlord (author)PiTBuLL8922010-01-02

no that orange thing that sticking out

PiTBuLL892 (author)dutchwarlord2010-01-02

forgot to say this
it it just a straight in straight out mag or are there any pins? cuz i luv guns that you just pull and it comes out then push another straight in

lol. that sounded sooooo wrong!!!! XD

PiTBuLL892 (author)2010-01-05

i just remembered!
that slide system was SK'S and this is modified
its on his failed project: lever-action knex gun
yours has the handle at the side and top rail added
handle to pull it back easier (obviously)
and the rail so you can put more bands on without the rod bending up
which is what you need for a red rod pin gun!!!

pwnagerownager (author)2010-01-04

yeah, take your time making the instructions, dont rush it

heat-seeker (author)2010-01-04

Please dont give up on the instructable the amount of times people have said they will post a awsome gun they don't, please this will defently make 4 *

once again please post

pwnagerownager (author)2010-01-03

Were are those instructions?

PiTBuLL892 (author)2009-12-27

2 days after christmas and still no instructions????

dutchwarlord (author)PiTBuLL8922009-12-28

i'm beginning right now

How far along are they? I really want this gun!

cool bas3 (author)dutchwarlord2009-12-28

be fast, iam waiting 12 days for this

kn3x person (author)2009-12-29

i dont want to put more presure on
but people have been waiting.....waiting..........waiting

PiTBuLL892 (author)2009-12-29

no instructions today. :(
hope there up tomorrow!
btw can you try to make my fave bullpup rifle on MW2??
the FAMAS!!

kn3x person (author)2009-12-28

YAY!!!!,instructions today!!!! (i think)
ive been waiting for a while.......

kn3x person (author)kn3x person2009-12-29

ok no instructions yesterday
today (i hope)

Blackbird17 (author)2009-12-26


kn3x person (author)2009-12-26

ITS THE DAY AFTER CHRISTMAS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
please get done by today!!!!!!!!!

heat-seeker (author)2009-12-25

iT IS CHRISTMAS !!!!! Are you going to post today?

dutchwarlord (author)heat-seeker2009-12-25

i'm sorry but i will posted the gun the day after chrismis because i'm to bissy

cool bas3 (author)dutchwarlord2009-12-26


Blackbird17 (author)2009-12-25

yea! post today!  :)

dutchwarlord (author)Blackbird172009-12-25

i'm sorry but i will posted the gun the day after chrismis because i'm to bissy

erikos kostarikos (author)2009-12-21

Are you going to post it?
PLEASE do becausse I love this gun!!!

WOOOOOOOOOOOOOOO DANKJE!!!!!!!!!!!!!!!!!!!!!!

barrax (author)2009-12-18


i was gonna say it is perfect but the stock looks too long, but it doesn't (just googled it)

the stock looks a lil out of shape, and also the fore barrel is too short, but that is something pretty small in terms of detail.

in fact, looking again, this pic shows that the stock does look a bit long..

Fived and Faved (except i cant for a slideshow...) please post

TigerNod (author)barrax2009-12-19

"...and also the fore barrel is too short..."

Look at this image below, the barrel is nothing too short.

barrax (author)TigerNod2009-12-19


the pic that i found must have had an extended barrel...

TigerNod (author)barrax2009-12-21

Not excactly, the pic that I found was a CTAR 21, a shortened vesion. (

barrax (author)TigerNod2009-12-21


dutchwarlord (author)barrax2009-12-18

i kwon but the reson why it is so long is that i want a fuctional stock so there must be no ram sticking out of it

barrax (author)dutchwarlord2009-12-19

good reason.

now i have nothing to complain about :D

dutchwarlord (author)barrax2009-12-19


barrax (author)dutchwarlord2009-12-19

its cool bro.

Hiyadudez (author)barrax2009-12-18

Actually, you can fave  slideshow, I just did, look at my profile.

Seleziona (author)2009-12-20

May i add this to list? Christmas knex gun list

dutchwarlord (author)Seleziona2009-12-21


Seleziona (author)dutchwarlord2009-12-21

Thank you!

About This Instructable




Bio: i like to make knex guns and to play on my xbox 360 and i really like to dance (breakdance)
More by dutchwarlord:knex FALLwhats this? my FAL V2Newisch Gun
Add instructable to: