# T.A.R 21 Bullprup rifle

hee I'm back with a new gun
it is a T.A.R 21 bullprup rifle (that meens that the mag is behind the handle)
i used the dunkis trigger system (slimd it)
i also used a nice cooking system you can easely put it in it don't fall out of the gun and you can easely put it out
i think it's never been used by anybody
i also used a very well rail system i think SK disigned it and i little modded it
some pros and cons
pros:
nice sliding trigger (dunkis)
nice rail system
comfy handle
comfy front grip
nice sight
new cooking mechanism
shoots white rods
con's:
the ram is a brown/ red rod
i only get around 30 feet

IT IS POSTED
GO MAKE IT RATE IT FAVE IT
AND SUB ME

thank you
shazooo2u says: Apr 6, 2012. 11:45 PM
best tar 21 ive ever seen and also its called bullpup, not bullprup.
bhuty says: May 30, 2011. 1:24 PM
im building myown tar21 but i dont know how to make curved mag for the ammo (grey clip-green rod-grey clip) or how to get it to stay in the gun
help ppppppppppplllllllllllllllllleeeeeeeeaaaaaaaaassssssssssssseeeeeeeeeee!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
RedStark in reply to bhutyJul 5, 2011. 10:38 AM
to get it to stay in the gun, just get a rod and slide it through the gun and into the mag
not sure about the mag tho
ask dutchwarlord if you can use his

MrSillyGuns says: Aug 18, 2010. 11:43 AM
How do I put this?..... FREAKIN' SWEET!
pwnagerownager says: Jan 10, 2010. 11:27 PM
there are so many viruses on this website...
TigerNod in reply to pwnagerownagerApr 6, 2010. 7:40 AM
Viruses? On Instructables? What do you mean?
hi this is pwnagerownager. i mean that without an anti-virus lots of stuff was happening. like fake popups for downloads. nothing to worry about tho
Ah, I see.
lazyboy13 says: Mar 12, 2010. 10:43 AM
you should make the stock a little bit bigger. 4.5
PiTBuLL892 says: Dec 31, 2009. 8:37 AM
(removed by author or community request)
dutchwarlord (author) in reply to PiTBuLL892Dec 31, 2009. 9:32 AM
give me one more weak
i promese
PiTBuLL892 in reply to dutchwarlordJan 6, 2010. 10:07 AM
not telling you to rush it but how far are you into the instructions???
erikos kostarikos in reply to dutchwarlordJan 4, 2010. 6:57 AM
Don't listen to them.
Just take your time, if they wantto build it, it first needs to be posted.
And when it gets posted, that depends on you.
PiTBuLL892 in reply to dutchwarlordJan 2, 2010. 6:58 AM
forgot to say this
it it just a straight in straight out mag or are there any pins? cuz i luv guns that you just pull and it comes out then push another straight in

lol. that sounded sooooo wrong!!!! XD
PiTBuLL892 in reply to dutchwarlordJan 2, 2010. 6:55 AM
ok
1 more question: how does the mag stay in?
does that tan connector hold it in?
dutchwarlord (author) in reply to PiTBuLL892Jan 2, 2010. 6:04 PM
no that orange thing that sticking out
PiTBuLL892 says: Jan 5, 2010. 10:05 AM
i just remembered!
that slide system was SK'S and this is modified
its on his failed project: lever-action knex gun
yours has the handle at the side and top rail added
handle to pull it back easier (obviously)
and the rail so you can put more bands on without the rod bending up
which is what you need for a red rod pin gun!!!
pwnagerownager says: Jan 4, 2010. 5:10 PM
yeah, take your time making the instructions, dont rush it
heat-seeker says: Jan 4, 2010. 12:19 AM
Please dont give up on the instructable the amount of times people have said they will post a awsome gun they don't, please this will defently make 4 *

pwnagerownager says: Jan 3, 2010. 11:14 PM
Were are those instructions?
PiTBuLL892 says: Dec 27, 2009. 1:02 PM
2 days after christmas and still no instructions????
dutchwarlord (author) in reply to PiTBuLL892Dec 28, 2009. 5:18 AM
i'm beginning right now
silentassasin21 in reply to dutchwarlordDec 30, 2009. 8:19 PM
How far along are they? I really want this gun!
cool bas3 in reply to dutchwarlordDec 28, 2009. 7:36 AM
be fast, iam waiting 12 days for this
kn3x person says: Dec 29, 2009. 12:33 PM
i dont want to put more presure on
but people have been waiting.....waiting..........waiting
sssooooooo,ya
PiTBuLL892 says: Dec 29, 2009. 12:14 PM
no instructions today. :(
hope there up tomorrow!
btw can you try to make my fave bullpup rifle on MW2??
the FAMAS!!
kn3x person says: Dec 28, 2009. 9:48 AM
YAY!!!!,instructions today!!!! (i think)
ive been waiting for a while.......
kn3x person in reply to kn3x personDec 29, 2009. 8:15 AM
ok no instructions yesterday
today (i hope)
Blackbird17 says: Dec 26, 2009. 4:28 PM
yea!
kn3x person says: Dec 26, 2009. 8:39 AM
ITS THE DAY AFTER CHRISTMAS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I CANT FIND IT!!!!!!
heat-seeker says: Dec 25, 2009. 2:58 AM
iT IS CHRISTMAS !!!!! Are you going to post today?
dutchwarlord (author) in reply to heat-seekerDec 25, 2009. 1:24 PM
i'm sorry but i will posted the gun the day after chrismis because i'm to bissy
sorry
cool bas3 in reply to dutchwarlordDec 26, 2009. 5:10 AM
nooooo!
Blackbird17 says: Dec 25, 2009. 1:10 PM
yea! post today!  :)
dutchwarlord (author) in reply to Blackbird17Dec 25, 2009. 1:24 PM
i'm sorry but i will posted the gun the day after chrismis because i'm to bissy
sorry
erikos kostarikos says: Dec 21, 2009. 1:51 AM

Are you going to post it?
PLEASE do becausse I love this gun!!!

dutchwarlord (author) in reply to erikos kostarikosDec 21, 2009. 4:19 AM
yes
erikos kostarikos in reply to dutchwarlordDec 22, 2009. 4:36 AM
WOOOOOOOOOOOOOOO DANKJE!!!!!!!!!!!!!!!!!!!!!!
IK WEET GWN AL 100000% ZEKER DAK HEM GA MAKE!!!
barrax says: Dec 18, 2009. 1:30 PM
nice.

i was gonna say it is perfect but the stock looks too long, but it doesn't (just googled it)

the stock looks a lil out of shape, and also the fore barrel is too short, but that is something pretty small in terms of detail.

in fact, looking again, this pic shows that the stock does look a bit long..

Fived and Faved (except i cant for a slideshow...) please post

TigerNod in reply to barraxDec 19, 2009. 12:38 PM
"...and also the fore barrel is too short..."

Look at this image below, the barrel is nothing too short.
barrax in reply to TigerNodDec 19, 2009. 12:46 PM
true...

the pic that i found must have had an extended barrel...
TigerNod in reply to barraxDec 21, 2009. 2:14 AM
Not excactly, the pic that I found was a CTAR 21, a shortened vesion. (http://en.wikipedia.org/wiki/IMI_Tavor_TAR-21)
barrax in reply to TigerNodDec 21, 2009. 6:54 AM
aha
Actually, you can fave  slideshow, I just did, look at my profile.
dutchwarlord (author) in reply to barraxDec 18, 2009. 1:50 PM
i kwon but the reson why it is so long is that i want a fuctional stock so there must be no ram sticking out of it
barrax in reply to dutchwarlordDec 19, 2009. 2:40 AM
good reason.

now i have nothing to complain about :D
dutchwarlord (author) in reply to barraxDec 19, 2009. 3:03 AM
thanks
barrax in reply to dutchwarlordDec 19, 2009. 4:14 AM
its cool bro.
Seleziona says: Dec 20, 2009. 5:46 PM
May i add this to list? Christmas knex gun list
sure
Seleziona in reply to dutchwarlordDec 21, 2009. 6:15 AM
Thank you!
nutty guy says: Dec 19, 2009. 4:40 AM
does the mag work ? bcasue if i does i will give 5*
dutchwarlord (author) in reply to nutty guyDec 19, 2009. 7:45 AM
yes it does!
nutty guy in reply to dutchwarlordDec 20, 2009. 4:38 AM
5*
gtrain says: Dec 19, 2009. 8:48 PM
you said you gave the dunkis credit for the trigger, what gun did you copy it from?
dutchwarlord (author) in reply to gtrainDec 20, 2009. 1:41 AM
look at his forum topic
gtrain says: Dec 18, 2009. 10:45 PM
pure genius....just need to get better range
dutchwarlord (author) in reply to gtrainDec 19, 2009. 3:08 AM
I know but  that's hard because it is a bullpup
only slingshots can have a great range and will looking good
the only way to improve the power is to use a black rod instead of a brown (red rob) but that will kill the look of it
and the stock will not be fuctional
so this is all the power I get from it
gtrain in reply to dutchwarlordDec 19, 2009. 8:46 PM
fair enough
silentassasin21 in reply to dutchwarlordDec 19, 2009. 12:30 PM
Well see if it will hold more rubberbands and see if you can shorten the internal barrel then change the ammo you get more range trying to do something more like that
DB9 in reply to dutchwarlordDec 19, 2009. 11:45 AM
if you put a black rod in you can just extend the stock again so it is more powerful but it will lose its looks slightly
The Creatornator says: Dec 19, 2009. 7:53 PM
Nice, can you make a FN2000 next?
TigerNod says: Dec 19, 2009. 12:31 PM
Oooooooooh, sweet! It was about time that at least somebody posted a Tavor. 4.0 stars.
erikos kostarikos says: Dec 19, 2009. 9:44 AM
GREAT job!!!
5* man!!
Believe me, you've deserved it!
chopstx says: Dec 18, 2009. 2:00 PM
Will you P0\$T
Seleziona in reply to chopstxDec 18, 2009. 4:28 PM
Well, you said MAYBE, but whatever.
Seleziona in reply to chopstxDec 19, 2009. 8:44 AM
lol
knex_builder_freak says: Dec 18, 2009. 6:08 PM
Amazing...

POST!!!
travw says: Dec 18, 2009. 2:45 PM
BTW: Title is spelled wrong. "Bullprup"
~KGB~ says: Dec 18, 2009. 1:44 PM
post!!!
Mr. Muggle says: Dec 18, 2009. 12:55 PM
nice trigger guard
dutchwarlord (author) says: Dec 18, 2009. 8:40 AM
extra pics coming up
heat-seeker says: Dec 18, 2009. 8:27 AM
That....Is....AWSOME! I have countlessly tried to make a  Tavor (tar 21) but faild and this comes out. Please post before xmas!
entenie-1995 says: Dec 18, 2009. 8:27 AM
post it and i rate 5*.
cool bas3 says: Dec 18, 2009. 8:15 AM

great gun!!
but  its bullpup!