Introduction: TBOS (Thunder Bolt Oodammo Sidearm)

About: Im Killer~SafeCracker, I started using Instructables in 2009. I mainly post in the Knex world, but I venture out sometimes. Check out all my instructables, you wont be disappointed! I live for music and I pla…

Here it is everyone the TBOS. By far, my best knex pistol so far. It's twice as powerful as the TBAP. It's more compact and sturdy, plus it was build for comfort. Some of it's features are: twelve shot oodammo mag, true trigger, extremely nice handle, compact, it has a new ram lock, and it's as sturdy as a rock. It gets a range of 55 - 60 and has great accuracy.
Sound good?? Let's start building.
Tell me what you think it only takes a few seconds.
*EDIT* This gun got to 4.26 stars. #1 for all knex things.
Also don't forget to
SUBSCRIBE
Killer~SafeCracker

Step 1: Part Count

We all hate it when we don't have enough parts to finish a project. So I made a part count for you.

Connectors:
White-------------------------4
Blue---------------------------2
Yellow------------------------24
Green-------------------------6
Red----------------------------5
Light Gray--------------------3
Orange-----------------------5
Dark Gray--------------------1

Rods:
Black/Gray-------------------1
Yellow-------------------------1
Flexi blue rod-----------------1 (I guess it's not needed, but it makes it feel nice)
White--------------------------24
Green-------------------------65

Odds and Ends:
Blue spacers----------------6
Y connectors----------------8
Blue and Black hinges----1
Ball socket-------------------2
Tan clip------------------------1
Small black wheels---------6 (You don't have to use these they just make it feel nice, You can also use head tops if you want)
Rubberbands---------------4

Step 2: Step 1

In this step you'll be building the body of the gun.
Picture 1: Build two of these panels.
Picture 2: Add the white rods ,that are noted, to one of the panels.

Onto the next step.

Step 3: Step 2

In this step we will make the trigger and the inside of the handle.
Picture 1: Build these things.

Onto the next step.

Step 4: Step 3

In this step you will build the insides of the barrel.

Picture 1: Build these. They will be the top of the barrel.
Picture 2: Build the lower barrel.

Onto the next step.

Step 5: Let's Put It Together

We are going to put it together now.
Picture 1: Add this part to the handle.
Picture 2: Add this part of the barrel.
Picture 3: Add this part, It also serves as the mag wall.
Picture 4: Add this part.
Picture 5: Add this part.
Picture 6: Add the trigger.
Picture 7: Finaly you add the other side of the gun.
Picture 8: Add the small wheels on the handle.

Sorry is the pictures are a tad fuzzy.

Step 6: Loading

Picture 1: First build this.
Picture 2: Fill it with Oodammo
Picture 3: Snap it into the gun.
Picture 4: Build the ram
Picture 5: Add the rubber bands to the ram
Picture 6: Add rubber bands to the trigger
Picture 7: Add rubber bands to the mag

Step 7: YOU ARE DONE!!!!

You're done!!
Tell me what you think.
Have fun!!
Killer~SafeCracker