loading

The Ultimate Control Box is an idea come out of boredom

Step 1: GET READY AND GATHER UP THE NECESSARY ITEMS

  • WHAT YOU WILL NEED
  • 4 pieces of wood (37x10x10cm) // or smaller or larger it up to you
  • Some cable about 2 meter
  • 1 On/Off Switch // I reccomened not a big sized
  • 4 sockets or more
  • 1 arduino pro mini or a trnket pro mini /mini
  • 1 Ir receiver
  • 1 old 5 or 12 volts adaptor
  • 1 usb to usb micro cable
  • 1 4-relay module
  • Some nail and srews

Step 2: THE HARDWARE PART

  • ONE OF THE FOUR PIECES OF WOOD DRAW 4 CIRCLES AND THEN DRILL THEM
  • PUT THE SOCKETS IN TH WHOLES
  • CONNECT THE CABLES
  • CONNECT THE POWER SUPPLY IN THE NO AND COM PORTS OF THE RELAYS AND THE TO THE SOCKETS

Step 3: CODE


THE FIST CODE IS FOR CONTROLLING THE BOX WITH AN IR
THE SECOND VIA BLUETOOTH THE THIRD VIA CELLPHONE

<p>Nice one! I could hear Greek advertisements on the radio</p>
<p>&Epsilon;&upsilon;&chi;&alpha;&rho;&iota;&sigma;&tau;&omega;!!!!&Delta;&epsilon;&nu; &epsilon;&iota;&nu;&alpha;&iota; &rho;&alpha;&delta;&iota;&omicron;&phi;&omega;&nu;&omicron; &epsilon;&iota;&nu;&alpha;&iota; &tau;&eta;&lambda;&epsilon;&omicron;&rho;&alpha;&sigma;&eta; :P &kappa;&alpha;&iota; &tau;&omicron; turbo -x &tau;&eta;&lambda;&epsilon;&kappa;&omicron;&nu;&tau;&rho;&omicron;&lambda;</p>
<p>this is really cool !! thanks for sharing</p>
<p>thanks!!!!!!!</p>

About This Instructable

997views

26favorites

More by creator45:The Easiest way to make your own  pcb The easiest way to make  wardrobe lights THE ULTIMATE CONTROL BOX 
Add instructable to: