loading

THIS IS FOR SCIENCE AND ELECTRICITY BUT IF YOU WANT TO MAKE IT WITH YOUR ADULT SUPERVISION

WARNING:THIS IS USB WITH CUT WIRES THAT MAY BE SHOCKING DON'T TOUCH TWO WIRES TOGETHER.

Step 1: What Do You Need

1.Usb cable not in used

2.LED

3.if you want to attach the fan that will need OTG to smart phone or if u want to attach the fan on computer that doesnt need otg cable

4.computer fan or old cooling pad fan that not in use

5.Motors

6.the otg works if your smartphone have otg support

Step 2: Method for Fan

first take a computer fan . the fan must have 2 wires or four wires cut the 2 wires green and white if doesnt. if you have only 2 wires dont cut it just solder it to usb cable and usb cable have four wires and cut the 2 wires green and white

and solder and you have done

Step 3: Method for Led

usb cable have four wires and cut the 2 wires green and white

and solder and you have done just solder it two led wires

Step 4: Method for Motors

usb cable have four wires and cut the 2 wires green and white

and solder and you have done just usb red and black wires solder it to motors plugs

Step 5: The Results Are

Very brighter faster fastest

If you like my instructable just vote and i will make new instructables sorry for bad english Thanks

<p>The USB rails cannot shock you ! They are just 5 Volts</p>
<p>if u touch two wires then the spark comes and wire will be very hot and hand will burn</p>
<p>i love this simple idea and i want this fan for my smartphone</p>
<p>if u like plz vote me i will be make u intelligent</p>

About This Instructable

3,295views

24favorites

Bio: My name is Rockz rockyq and i am 16 years old
More by monop:ACTION FIGURE SMARTPHONE HOLDER Make Funny Sentences game  The Cockroach Killer 
Add instructable to: