Introduction: TO_MY_LOVER_<3

Picture of TO_MY_LOVER_<3

the moon festival is the day of our marry memorial day ,

and the project is the gift that i wanna to do !

Step 1: SOLDERING THE ELEMENTS ON THE PCB

Picture of SOLDERING  THE ELEMENTS ON THE PCB

do connecting matrix ckt on the PCB

Step 2: CONNECT TO YOUR ARDUINO NANO AND TESTING IT USE THE USB CABEL

Picture of CONNECT TO YOUR ARDUINO NANO AND TESTING  IT USE THE USB CABEL

do testing circuits and do testing the text in the program

Step 3: SOLDERING 3V Batt. HOLDER ON PCB AND MODIFYING THE SOFTWARE FOR CAPICITY SENSOR

Picture of SOLDERING 3V Batt. HOLDER ON PCB AND MODIFYING THE SOFTWARE FOR CAPICITY SENSOR

Step 4: CONNECTING WIRES FOR THE CAPACITY SENSOR AND UPLOAD THE PROGRAM

Picture of CONNECTING WIRES FOR THE CAPACITY SENSOR AND UPLOAD THE PROGRAM

the black wire as the antenna of capacity sensor,

and the 2.2M ohm connecting to nano PIN6 PIN7.

Step 5: INSERTING THE BATTERY AND TESTING

Picture of INSERTING THE BATTERY AND TESTING

file1 : test the nano touch

file2 : test the nano after touch

Step 6: EMBEDDING THE PCB INTO a WOODEN BOX

Picture of EMBEDDING THE PCB INTO a WOODEN BOX

Step 7: Coding

Picture of Coding

i merge the code of LED-matrix and

code of capacitor sensor for

sensing the one who touch the box.

Comments

About This Instructable

381views

2favorites

License:

Bio: As a young kid, my curiosity in electronics was compelling.... why does thunder interrupt the radio reception? ....why does ROBOTs run without any wire?.... and ... More »
More by David_Lin:'H'ow to Made Alexa Love Me 'A'gainAlexa Go Go With RPi 3_part_2Tiny Robot Plat Form With Pi Zero_part1
Add instructable to: