Introduction: TRUELY Semi-auto Knex Gun

This is my new truely semi-automatic knex gun and that means no more having to pull back the firing pin because when you pull the trigger it pulls back the firing pin and shoots it!! Thiis is a brand new knex gun design never used in knex before. the only down side is is that it doesn't shoot to far but the way you put on the rubber bands you can probably get more power out of it then i did (watch the video to see how to put on the rubber bands. Anyways please rate and if you have any questions or concerns just ask and ill probably reply the same day. THANKS and ENJOY!!



PARTS LIST
rods
-101 green rods
-54 white rods
-20 blue rods
-10 yellow rods
-4 black/gray long rods

connectors
-42 yellow connectors
-2 green connectors
-6 gray 2 connectors
-54 gray single connectors
-20 orange connectors
-2 tan rod connectors
-38 white connectors
-3 blue connectors
-42 black Y connectors (i used alot of these as spacers so u probably don't need all of these)
-5 red connectors
-10 black U joint connectors

spacers
-11 blue spacers
-4 gray spacers

TOTAL
435

MY KNEX HAND GUN REVOLVER
https://www.instructables.com/id/8-SHOT-KNEX-HAND-GUN-REVOLVER/

MY 12 SHOT KNEX GUN
https://www.instructables.com/id/extreme_builders_12_shot_knex_gun/

hey everyone,
check out my youtube page
http://www.youtube.com/user/KNEmovies

Step 1: Handle

just follow the steps

Step 2: Stock

pretty easy

Step 3: Firing Pin

really easy

Step 4: Magazine

instead of the little Y connectors you can use spacers if you want

Step 5: Barrrel

might be hard to see but idk

Step 6: Body

the body and the pull back mechanism

Step 7: Put It Together

your done enjoy!