3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

TRULY insulate your loft (or attic!) - and save the planet

Step 6Preparation 2 - choose your weapons

Preparation 2 - choose your weapons
DANGER - DANGER - DANGER.

'Do you want a staple through your finger? '

It could put an end to your DIY career for ever. So save yourself that trip to casualty, and read this first.

A nailgun is essential - nailing upwards is a pain, and you need to nail every couple of inches to spread the strain and get a good seal. That's a lorra lorra nails.

First, I hired a Paslode gas-powered nailgun with 25mm (1 inch) staples - and that was just barely adequate for the SF40. A standard DIY shop nailgun uses maximum 14mm staples: that will not do the job - or anything like.

But nailguns are scary. If you're not scared, you don't understand the full extent of their power... See step 9.
« Previous StepDownload PDFView All StepsNext Step »

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
14
Followers
17
Author:LDW