Print PDF
Favorite
Email
Step 7How to prime the gas for a gas-powered gun
Just in case you have the same issues as me, the gas canister has to be prepared to go in the gun.
It starts out with the black cap sitting a few millimetres proud of the canister - first pic. You need to press the black part hard down against the canister till it drops into a lower position, flat down on the canister - second pic.
It took us hours to work this out from the gun's dismal instructions.
Oh - and be aware that a gas gun pumps out carbon monoxide. This is not good for you. Make sure your space is well ventilated.
It starts out with the black cap sitting a few millimetres proud of the canister - first pic. You need to press the black part hard down against the canister till it drops into a lower position, flat down on the canister - second pic.
It took us hours to work this out from the gun's dismal instructions.
Oh - and be aware that a gas gun pumps out carbon monoxide. This is not good for you. Make sure your space is well ventilated.
| « Previous Step | Download PDFView All Steps | Next Step » |
Of course, they may have made a mistake!
Tragic irony that it's being used for the purposes of sealing in the space you're working in. :D