With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
If you have a Generation4 TV-B-Gone you can modify it by adding a switch to choose between European POWER code transmission or US POWER code transmission. First check ...
You need a very small switch (some sort of smt switch) to fit in the original case. If you got one, figure out where to put it - ...
If you have an european version, desolder R3 first. The left pad is connected to ground, the right side to pin 5 of the microprocessor (thanks to Mitch ...
If you put the batteries back in, the red led of the TV-B-Gone will blink 3 times if the switch is open (US-mode) and 6 times if the ...
From now on you have a few more chances to turn these TVs off. I've found 2 LCDs near my place, that need to get the US-codes. Little ...
Double the Range of Your TV-B-Goneby mitch
Solar TV-B-Goneby bsquares
TV-B-Gone Coffee Cupby nsutaria
Let's Make a TV-B-Goneby aggrav8d
Easy Arduino Pro Mini TV-B-Gone Disguisedby ghpk
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »