Print PDF
Favorite
Email
Step 5Attach the TV and finishing touches
Next thing we did was get the TV mounted onto the Pop Up TV Lift. This was fairly straight forward with the universal TV mount that comes with the Pop Up TV Lift Kit.
We placed the power/control box inside the cabinet and attached the cable to the Pop Up TV Lift column, then plugged the power box into the wall.
A push of the remote control button and things were under way!
A couple of tweaks here and there, including adding a section of 2x4 with a rounded corner. You can see in the photo that it's placed on the top of the column so that the lid can hinge. Chances are you can do a much more graceful and nicer looking 'lid lifter', but this was good for the meantime.
We also attached a flap of cardboard to the back side of the TV lift so the hinged lid wouldn't catch when the TV was coming down. Again, not high tech, but got the job done.
We placed the power/control box inside the cabinet and attached the cable to the Pop Up TV Lift column, then plugged the power box into the wall.
A push of the remote control button and things were under way!
A couple of tweaks here and there, including adding a section of 2x4 with a rounded corner. You can see in the photo that it's placed on the top of the column so that the lid can hinge. Chances are you can do a much more graceful and nicer looking 'lid lifter', but this was good for the meantime.
We also attached a flap of cardboard to the back side of the TV lift so the hinged lid wouldn't catch when the TV was coming down. Again, not high tech, but got the job done.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
