Here it is the one the only TZ 1000!!! This amazing gun has a ten shot magazine that has never jammed over the hundreds of times I have shot it. Also it will shoot 35-40 feet and can pierce a box at 3 feet with one rubber band.

PROS:
Sturdy
light weight
10 shot mag that never jams
can shoot 35-40 feet with one rubber band
can pierce a box at 3 feet with one rubber band
good looking
true triger

cons:
uses a decapetated orange connector.

Tell me what you think

Step 1: Magazine

Okay here we go. To start off we are going to build the magazine.

Step 1: build both

Spep 2: build both

Step 3: add white rods

Step 4: add parts you made in step 1

Step 5: add second panel and you are done with the mag

on to the next step >>>>>>

Step 2: Handle

Now the the handle.

Step 1: build both

Step 2: build

Step 3: build

Step 4: add yellow and blue rods

Step 5: add both parts

Step 3: Trigger

Okay now this is easy. Just build it

Step 4: Barral

Now I tried to make this as easy I can.

Just follow the pictures.

In the 4th pic cut where the yellow box is.

Step 5: Mag Pusher

just build

Step 6: Firing Pin

okay last thing to build the firing pin. You need to use the black rod for the firing pin because it is stronger. I mean you don't have to but it will make the gun stronger.

Step 7: Putting It Together

Okay almost done.

Add mag

Add handle

Add trigger

Add ram

Step 8: Loading and Firing

Okay we are done. Now just load the bullets and put the pusher in. It is now done. Just pull back the pin and fire!!!

If you have any questions please use my orange board.