Instructables
Picture of TZ -1,000 knex ten shot pistol
HPIM9873.JPG
Here it is the one the only TZ 1000!!! This amazing gun has a ten shot magazine that has never jammed over the hundreds of times I have shot it. Also it will shoot 35-40 feet and can pierce a box at 3 feet with one rubber band.

PROS:
Sturdy
light weight
10 shot mag that never jams
can shoot 35-40 feet with one rubber band
can pierce a box at 3 feet with one rubber band
good looking
true triger

cons:
uses a decapetated orange connector.

Tell me what you think
 
Remove these adsRemove these ads by Signing Up

Step 1: Magazine

Picture of Magazine
HPIM9882.JPG
HPIM9883.JPG
HPIM9887.JPG
HPIM9889.JPG
Okay here we go. To start off we are going to build the magazine.

Step 1: build both

Spep 2: build both

Step 3: add white rods

Step 4: add parts you made in step 1

Step 5: add second panel and you are done with the mag

on to the next step >>>>>>

Step 2: Handle

Picture of Handle
HPIM9893.JPG
HPIM9895.JPG
HPIM9898.JPG
HPIM9900.JPG
Now the the handle.

Step 1: build both

Step 2: build

Step 3: build

Step 4: add yellow and blue rods

Step 5: add both parts

Step 3: Trigger

Picture of trigger
Okay now this is easy. Just build it

Step 5: Mag pusher

Picture of mag pusher
just build

Step 6: Firing pin

Picture of firing pin
okay last thing to build the firing pin. You need to use the black rod for the firing pin because it is stronger. I mean you don't have to but it will make the gun stronger.

Step 7: Putting it together

Picture of putting it together
HPIM9926.JPG
HPIM9927.JPG
HPIM9928.JPG
Okay almost done.


Add mag

Add handle

Add trigger

Add ram

Step 8: Loading and firing

Picture of loading and firing
Okay we are done. Now just load the bullets and put the pusher in. It is now done. Just pull back the pin and fire!!!


If you have any questions please use my orange board.

XenixHero3 years ago
What's the blue-ish piece at the front?
st j4 years ago
good a step that doesnt hurt ur thumbs. Phew. :)