Print PDF
Favorite
Email
Step 3The Corners
Ok so the corners ended being a little tricky and if i was to do this again I would not put on the 2 x 4 legs untill after the frame was built.
1. take the 2 x 4 and 2 x 2 strips you should have 4 of each. the height of the tank was 12 " so i made the sides 15" to accomodate for mounting space.
2. PRE DRILL the 2 x 4 and attach the 2 x 2 creating an L shape as in the pictures below.
1. take the 2 x 4 and 2 x 2 strips you should have 4 of each. the height of the tank was 12 " so i made the sides 15" to accomodate for mounting space.
2. PRE DRILL the 2 x 4 and attach the 2 x 2 creating an L shape as in the pictures below.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
