Step 1: Outside
Place any colour around the loom. Make sure u place both of the rubber bands (right side and left side) at the same time (see picture)
Step 2: Figure 8's
Place the rubber bands (twisted) on the loom (see picture)
Step 3: Second Layer
Add a second layer of the figure 8's. Add another twisted rubber band on top of the twisted rubber bands or "8's" from the previous step.
Step 4: Capping Band
Place a capping band at the end of the loom.
Step 5: Hooking
Hook the outside (white) like u r hooking a single. Drag the rubber band over to peg it belongs to.
Step 6: Pulling It Off
Pull it off!! Add a clip and ur done!!
Step 7: Extension
This is totally optional but if you feel that it's too tight, add a few rubber bands as an extension.