3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

Taking Apart a Sony Vaio Laptop

Step 5Remove the ribbons

Remove the ribbons
«
  • 07.jpg
  • 08.jpg
  • 09.jpg
  • 10.jpg
  • 11.jpg
Remove the keyboard ribbon and all other ribbons that you see there. For the keyboard ribbon, I had to push the little black plastic back a little and pull on the blue tab. It should come out fairly easily. For the smaller ribbons, the black latch flipped upward and the blue ribbons came out easily. There was only one more connection and it was your typical 3 wire jack. Slowly remove it, as well. I used my flathead screwdriver to pry it out gently. Again, the key here is not to be a Neanderthal. Everything has a purpose and if you tug like a savage you will break something. Take some time and figure it out. It's not worth breaking something. There are a couple more case screws you'll want to remove. There should only be two or three.
« Previous StepDownload PDFView All StepsNext Step »
1 comment
Jan 24, 2010. 3:28 PMmunser says:
 My computer (which I think is the same one) had 3 screws under the keyboard that needed to be removed.

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
2
Followers
1
Author:bavalova