With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Make a cool sleeve for your iPod or cell phone that will protect it from water, dust, and all those other evil things. First instructable- that means ...
You're going to need some duct tape(I chose black),clear packaging tape, scissors, x-acto knife or some other kind of razor, and (of course) your cell...
Cut out a piece of duct tape about half as long as your phone/ipod.
Fold the duct tape over. This takes practice, so if you don't get it after a couple of tries you can just stick two smaller pieces of tape together
Ya you are now done with the back cover
Get a piece of tape as long as the phone/mp3. Fold it the long ways. Repeat.
Tape it all together and stick the phone/mp3 in. Should look like pics. Again, sorry for the bad quality.
Cut off the excess on the top and front of phone.
Cut out a tiny piece and fold it.
Tape the tiny lil thing you just made to the top.
Repeat step 2 only with the clear packaging tape and make it a little longer.
tape your clear cover on with more clear tape. Make sure the whole phone/mp3 is covered now. If it's not you need a longer piece of packaging tape. It...
Use your razor to cut out holes for the charger, headphones, speaker, etc. If you want to take the phone/mp3 out of it's sleeve then use your razor to...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »