Introduction: Tarp Tent

Step 1: What You Need

1. tarp obviously 1 or 2
2.a mylec mini hockey net 1
3. steaks 6
4. bungee 1

Step 2: Mini Hockey Net

Strip format of all the net and stuff so there's just the PVC you you just need 3 elbows
and two of the three way connectors

Step 3: Assembly

Put the PVC pieces in a pattern like this shown in the picture

Step 4: Put on the Top

take the tarp put on the PVC frame show
the three holes Are in the front The other
three Are in the back and so there is one on either side

Step 5: Put in the Steaks

now just put all the steaks in all of the holes
please give me tips about what I can do better in the comments don't forget to follow me and I hope you like it enjoy

Step 6: Pack Away the Tent

just roll up the steaks and the PVC poles in the tarp and then to put the bungee wrap it around and hook it to itself then you're done

Comments

author
wdsims63 made it! (author)2013-12-18

What are the dimensions of this tent? You seem to be a bit shorter than me.

I missed the part where you eat the steaks.
Don't you think it would be wise to stake it down to keep the tarp from blowing off? ;)

On a more serious note, where is the door? You didn't really explain how you get into this tent, and then close the door/flap securely.

author
broccali made it! (author)2013-12-02

what if there are no trees

author
ParkerMansel made it! (author)2013-12-02

Or u could take a piece of string, tie it to two trees and throw a tarp over it and call it a day

About This Instructable

2,546views

15favorites

License:

More by broccali:Lego mech suitThe Guitar pick braceletThe flying v
Add instructable to: