Print PDF
Favorite
Email
Step 10Make the fence supports
I need to be able to break this down into reasonably small pieces so it could be stored in may garage and other places, so the fence would be attached to the columns using a tab "A" into slot "B" approach.
I used over sized "T" connections (3/4" to 1/2") to allow the fence to be positioned in the yard and then used short pieces of PVC as the anchors.
I used over sized "T" connections (3/4" to 1/2") to allow the fence to be positioned in the yard and then used short pieces of PVC as the anchors.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
