Print PDF
Favorite
Email
Step 8Backwards a little to the cemetery topper...
I wanted some sort of sign on the top of the cemetery entrance, and I wanted it to look like wrought iron.
For this I used two sticks of the PVC pipe and heated it with a heat gun until I could mold it into a jig I made (I just drew a spiral on a piece of the scrap plywood and put screws where the bends would be).
I made this spiral on both ends of the PVC pipe for a total of four. Once assembled and painted, the topper looked pretty good. As a bonus, the topper gave a route for the wiring between the two columns (keeping the wires off of the walkway).
For this I used two sticks of the PVC pipe and heated it with a heat gun until I could mold it into a jig I made (I just drew a spiral on a piece of the scrap plywood and put screws where the bends would be).
I made this spiral on both ends of the PVC pipe for a total of four. Once assembled and painted, the topper looked pretty good. As a bonus, the topper gave a route for the wiring between the two columns (keeping the wires off of the walkway).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
